Page 1 of 1

Spare part for the SNAPPY potentiometer

Posted: May 20th, '18, 19:59
by FLOz
Hello,

Unfortunately the SNAPPY potentiometer of my snare drum (Potentiometer (B103) / VR9 /10K(B)) is broken (functional but the shaft is loose). Do you know where I can find a spare?

Greetings

Re: Spare part for the SNAPPY potentiometer

Posted: May 20th, '18, 22:00
by KlangGenerator
FLOz wrote:Hello,

Unfortunately the SNAPPY potentiometer of my snare drum (Potentiometer (B103) / VR9 /10K(B)) is broken (functional but the shaft is loose). Do you know where I can find a spare?

Greetings
https://www.mouser.de/ProductDetail/Bou ... uWlwC80Q==

Be aware that the D-shaft doesn't go all the way down to the body and needs to be filed. Otherwise it's an identical replacement.

Re: Spare part for the SNAPPY potentiometer

Posted: May 21st, '18, 09:50
by FLOz
Thanks for your fast reply.

But it seems that the lead spacing doesn't match between both potentiometers:

- The one on mouser has 5mm between pin 1 and 3 (standard lead spacing of 0.1inch).
- The one on the yocto has about 7,5mm between pin 1 and 3. And I don't find anything matching on the web (mouser, tayda, reichelt...).

Re: Spare part for the SNAPPY potentiometer

Posted: May 21st, '18, 12:38
by FLOz
I think I found the correct one: Bourns PDB12-H4251-103BF

https://www.mouser.de/ProductDetail/Bou ... mV5DwNKA==