Spare part for the SNAPPY potentiometer

Discuss Yocto construction and related issues

Spare part for the SNAPPY potentiometer

Postby FLOz » May 20th, '18, 19:59

Hello,

Unfortunately the SNAPPY potentiometer of my snare drum (Potentiometer (B103) / VR9 /10K(B)) is broken (functional but the shaft is loose). Do you know where I can find a spare?

Greetings
FLOz
 
Posts: 4
Joined: May 17th, '14, 13:01

Re: Spare part for the SNAPPY potentiometer

Postby KlangGenerator » May 20th, '18, 22:00

FLOz wrote:Hello,

Unfortunately the SNAPPY potentiometer of my snare drum (Potentiometer (B103) / VR9 /10K(B)) is broken (functional but the shaft is loose). Do you know where I can find a spare?

Greetings


https://www.mouser.de/ProductDetail/Bourns/PTV09A-4030F-B103?qs=Zq5ylnUbLm4pfFuWlwC80Q==

Be aware that the D-shaft doesn't go all the way down to the body and needs to be filed. Otherwise it's an identical replacement.
User avatar
KlangGenerator
 
Posts: 291
Joined: Aug 8th, '16, 16:36

Re: Spare part for the SNAPPY potentiometer

Postby FLOz » May 21st, '18, 09:50

Thanks for your fast reply.

But it seems that the lead spacing doesn't match between both potentiometers:

- The one on mouser has 5mm between pin 1 and 3 (standard lead spacing of 0.1inch).
- The one on the yocto has about 7,5mm between pin 1 and 3. And I don't find anything matching on the web (mouser, tayda, reichelt...).
FLOz
 
Posts: 4
Joined: May 17th, '14, 13:01

Re: Spare part for the SNAPPY potentiometer

Postby FLOz » May 21st, '18, 12:38

I think I found the correct one: Bourns PDB12-H4251-103BF

https://www.mouser.de/ProductDetail/Bou ... mV5DwNKA==
FLOz
 
Posts: 4
Joined: May 17th, '14, 13:01


Return to Yocto v1.0 Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron