Page 1 of 1

Waiting for ... (parts question)

Posted: Feb 9th, '18, 23:50
by emwhite
While I wait for a v1.0 kit to come available on the resale market (I am now the proud owner of a case), does anybody have a parts list for all of the buttons/switches/knobs? Were there any eagle files to have the PCBs made?

I see others posted here but if anybody has a kit that they want to sell, I'm not even looking for a good price, I'll pay a bad price. :) Thank you.

Re: Waiting for ... (parts question)

Posted: Feb 10th, '18, 03:15
by unclewoody
The BOM is available on this forum although I don't think knobs are included...

The Eagle files for the main board are available although it isn't routed. But there is a second I/O board which I don't recall seeing Eagle files for. I think this is to keep people from just getting these manufactured ;)

Re: Waiting for ... (parts question)

Posted: Feb 10th, '18, 05:16
by emwhite
I said knobs but I meant, pots, etc. all of the parts which were included in the original kits but not not he Mouser BOMs. Does anybody have a link to the Eagle file for the main board? Got start somewhere.

And thank you!

Re: Waiting for ... (parts question)

Posted: Feb 12th, '18, 04:58
by helectromagneticus
If you email Vincent, he may provide the potentiometer part numbers. If he does not, this will be a tricky one since the v1.0 kit is not in stock...

The Eagle BRD file of the mainboard without component routing is available at this page:
http://www.e-licktronic.com/en/content/ ... one-tr-808
You could use the measure command in Eagle and select a potentiometer based on lead spacing, mounting hole locations, etc. Complete Eagle files are not available.