Hi, I am on the waiting list for the Yocto Complete Kit, I have already got the housing(box) delivered to me from Formulor,
Q. In the pictures of the Yocto fully assembled there are screws holding it all together, are these with the 'Yocto Complete Kit' or do they need sourcing seperately, if so could you tell me what type/size etc screws would need ordering?
Thanks.
Screws for the housing
I count places for 16 screws and nuts in the enclosure .eps file.
On the kit list, there are included 16 long M3 screws and nuts, on this page:
http://www.e-licktronic.com/en/content/ ... one-tr-808
My conclusion is that they are included in the kit.
On the kit list, there are included 16 long M3 screws and nuts, on this page:
http://www.e-licktronic.com/en/content/ ... one-tr-808
My conclusion is that they are included in the kit.
Thanks!
Dear Seven,
I confirm that screw and nuts are included in the kit.
Best regards,
e-licktronic
I confirm that screw and nuts are included in the kit.
Best regards,
e-licktronic
Best regards,
e-licktronic
e-licktronic