Search found 68 matches
- Aug 22nd, '16, 16:41
- Forum: Nava Software
- Topic: Nava v1.0 Firmware
- Replies: 117
- Views: 175217
Re: Nava v1.0 Firmware
yeah, I can confirm that the mid tom is now working, and also that the high tom seems to be have a slightly too high level compared to low and mid tom. And I also would appreciate if a pattern would finish all 16 steps before the next pattern plays after a pattern change. Thanks for the effort and ...
- Aug 22nd, '16, 12:51
- Forum: Nava Hardware
- Topic: Mid Tom: low volume. Hi Tom: Overdriven/ distorted...
- Replies: 38
- Views: 26326
Re: Mid Tom: low volume. Hi Tom: Overdriven/ distorted...
Use MidiOX
Options/MIDI Devices and select Midi output to use
Options/Config Buffer and set as the Nava manual states
Prepare the Nava for recieving Sysex as manual states
Then Actions/Send - Sysex file
Wait for the transfer and Nava to update, which will start as soon as its done.
Options/MIDI Devices and select Midi output to use
Options/Config Buffer and set as the Nava manual states
Prepare the Nava for recieving Sysex as manual states
Then Actions/Send - Sysex file
Wait for the transfer and Nava to update, which will start as soon as its done.
- Aug 22nd, '16, 11:48
- Forum: Nava Hardware
- Topic: [solved] Bass Drum BUZZZ
- Replies: 90
- Views: 77769
Re: Bass Drum BUZZZ
Great that we now have the traces. And good work on trying to get to the bottom with this!
- Aug 17th, '16, 17:29
- Forum: Nava Hardware
- Topic: post your completed build pics
- Replies: 29
- Views: 24178
- Aug 16th, '16, 17:45
- Forum: Nava Hardware
- Topic: Nava Schematic Errors [SOLVED ON V1.01]
- Replies: 119
- Views: 104495
Re: Nava Schematic Errors
seeing this is not exciting considering I just ordered a kit, wondering if I should cancel my order... You're definitely better off now than we were a couple of months ago! But I would advise reading all big threads in the Nava Hardware section on this forum before you start, and making notes of re...
- Aug 16th, '16, 14:45
- Forum: Nava Software
- Topic: Shift button unresponsive after midi change to slave
- Replies: 6
- Views: 6026
Re: Shift button unresponsive after midi change to slave
I had managed to put a few 12k's instead of 220R's around the midi-connectors.. 
Don't know how that happened...
They are changed now and everything seems to be working good
Don't know how that happened...They are changed now and everything seems to be working good
- Aug 16th, '16, 08:40
- Forum: Nava Software
- Topic: Shift button unresponsive after midi change to slave
- Replies: 6
- Views: 6026
Re: Shift button unresponsive after midi change to slave
Mine is also very wierd when tying to set to "slave". Alot of menus doesnt seem to work after that, and I cant go back to config to put it back to master (only thing to do then is to reset to factory settings).. Everything else seems to be working good. Ok, it wasn´t that bad. When in sla...
- Aug 12th, '16, 05:01
- Forum: Nava Software
- Topic: Shift button unresponsive after midi change to slave
- Replies: 6
- Views: 6026
Re: Shift button unresponsive after midi change to slave
After I switch in the settings from Master to Slave MIDI, the shift button doesn't work when trying to access step or tap edit modes. Mine is also very wierd when tying to set to "slave". Alot of menus doesnt seem to work after that, and I cant go back to config to put it back to master (...
- Jul 28th, '16, 20:05
- Forum: Nava Mods
- Topic: Secondary Noise Source Kit
- Replies: 70
- Views: 129426
Re: Secondary Noise Source Kit
Thanks for the clarification! 
- Jul 28th, '16, 13:27
- Forum: Nava Hardware
- Topic: Sequencer part shows no voltages ?
- Replies: 4
- Views: 4223
Re: Sequencer part shows no voltages ?
The Seq doesn´t get its voltage from the "normal" power cable from the output board. I think it comes from the 8-pin connector closer to the display, so that needs to be hoocked up aswell.