e-licktronic Forum

Haha, awesome!

Ouch...

Check that you have +15V and -15V. It might be you just fried one of the regulators.

Have you tried them with Roll? What happens?

Sounds like a short, check the sequencer schematics https://www.dsl-man.de/download/attachm ... 000&api=v2 and check your resistor legs

Sounds weird, I'll try that later today.

Hey my mouser bom came with 100uf 6.3v capacitors instead of the 100uf 10v caps the instructions call for. Is this a suitable replacement or am I doing something wrong. Thanks guys. Works fine with the 6.3V caps. AFAIK a higher voltage rated cap can have a longer lifetime than smaller one with the ...

I had two issues with my Yocto since the beginning. After a few days one of the switch LED's stopped working and the known ground hum when using the trigger outputs. I now fixed both with reflowing the LED connections and bending the ring connector of both trigger jacks away to cut the ground off. ...

I was using a multimeter to test it at first. It seems that the multimeter cannot catch the 2ms pulse. So it reads 0.07v all the time. And that makes me think that my circuit is going wrong. Fortunately, Bastien asked me to use a scope to track it. So here are the results. Hope that the next softwa...

Hi there Navaists, just wanted to let you also know that we've finally traced the problems down, there was nothing wrong with the hardware, problem lies with libraries being used. I'll start work on the Yocto bugs now and we'll see when I can get a Nava and start work on that also.

Best,
Pekka.

Phew. It has been a heavy two weeks. If all this time would've been spent on fixing the bugs instead of playing detective... Anyhow, we finally know the problem lies with the libraries being used, we still don't know what exactly (I'm guessing the Wire-lib used to talk to the EEPROM) but I'll resear...

Search found 71 matches

Re: Full Built Yocto // No sound on master or individual out

Re: Full Built Yocto // No sound on master or individual out

Re: Rimshot/Claves sound strange

Re: Instrument Select Changes CB/CYM/OH/CH pitch

Re: Rimshot/Claves sound strange

Re: Yocto bom 100uf 6.3v electrolytic caps vs 10v

Re: Din Sync Clock on the Trigger Output

Re: Gate Triggers don't properly trigger...

Re: Greetings from the new official firmware developer

Re: Greetings from the new official firmware developer