e-licktronic Forum

Kazper

+1 kit, thanks.

I also need a extra pair of the provided diodes.

Kazper

First, there is some instructions and parts that didn't work as espectected. Make sure you followed the start up procedure.

You should look over all the pcb, make sure no chips are backwards etc.

Check power
Check the master section
Check each drum sound, trigger each individually

Kazper

I think they are going to be AIRA tech in the Boutique category.

Personally, great for performance, but my recordings will be NAVA/YOCTO.

Kazper

Check the caps and pots if you can.. A misplaced cap can distroy the sound very easy. How are you triggering it for the sequencer or from the trigger point? Personaly I think the sequencer should be the second step in the build, so you can trigger your sounds etc.. It makes it easy to set up a easy ...

Kazper

Often people use a pair of small film or ceramic caps Between the encoder terminals to filter the true pulses and disregard any noise. Values under 1nF are prefered.

Here is a link to it on a synth.
http://synth.stromeko.net/DIY.html

Kazper

Did you solder the metal tabs that hold the pots in place ?

You might want to at least solder one side of them.

Kazper

In DIY the first step to making things work corectly is measure everything when you put it in. Use a printed copy of the instructions and cross every part off as you place it and solder etc.. I would recomend that you check every part from the parts list when you have a cool relaxed head. Think of i...

Kazper

Well I would assume you twisted the knobs etc?

Best thing is to look through ever component and make sure it's correct, then check for solder and solder bridges...

Kazper

smallBear has them:
http://smallbear-electronics.mybigcomme ... -pf-01-mf/

You may check out the 505-FKP2-3901002.5A at mouser as a possible option too...

Kazper

Slide Switch grounding tip Version 1.0 PCB. Slide switches are not connected to the 0V/Gnd area of the PCB. Some people notice extra noise from the ungrounded metal from the slide switches. If you have a powered down PCB, a simple continuity check would tell if you have a issue between the mounting ...

Search found 62 matches

Re: Yocto V1.0 kit last Batch

Re: Need Help, Nava Won't Power Up

Re: Rumors rumors

Re: BD sounds just as a click?!

Re: Flimsy data encoder?

Re: crackle when touching the pots with metal

Re: No sound coming from Cymbal Section

Re: BD sounds just as a click?!

Re: 390p Styrene caps out of stock at Mouser...

Re: Useful Building Tips