e-licktronic Forum

BastienL

Sorry for the delay, I was waiting to have more information regarding the shipping. The 11mm knobs are currently on their way (currently held by French customs), I should have them next week I guess, I'll prepare the sets once I have them and hope to start sending them the week after. You can fill t...

BastienL

You need to push both CH and OH buttons simultaneously. I find it harder to get into OH mode with v1.21 update, maybe it already was with previous firmware versions, i'll downgrade to v1.20 to see if it's my imagination or not. Fixed with the last v1.022 update ;) Best regards, e-licktronic Great! ...

BastienL

You're welcome, great to hear it's finished, now it's time to make some beats!

BastienL

You need to push both CH and OH buttons simultaneously. I find it harder to get into OH mode with v1.21 update, maybe it already was with previous firmware versions, i'll downgrade to v1.20 to see if it's my imagination or not.

BastienL

Hi, Having trouble finding SIL8 and SIL9 sockets. Tayda does not seem to carry them. Could I bother to ask if anyone has a source for these? Thank you Best is to buy a 40pin SIP like this http://www.taydaelectronics.com/30-pin-dip-sip-ic-sockets-adaptor-solder-type.html and break it appart into 8/9...

BastienL

You're welcome, glad to hear it works now.

BastienL

For ceramic/film capacitors, the first 2 numbers gives the value and the third is the multiplier, for exemple: 47pF marked 47 470pF marked 471 4700pF marked 472 47000pF = 47nF marked 473 470nF marked 474 Same for some potentiometers: 100 ohm = 101 1K = 102 10K = 103 100K = 104 and so on The pitch is...

BastienL

Hi Patrizio, Actually the cowbell needs two oscillators that are located in the cymbal circuit, so it should work once you completed it. The "bump" you hear is the cowbell enveloppe i guess, so the circuit seems to work as it should. Let us know how it goes once you've completed the cymbal.

BastienL

Yeah it's a known issue, I first mentioned it in the firmware thread just after doing the 1.0c update last year, and I mentioned it again in the official Yocto bug list thread recently.

BastienL

If you can't find them there, you can also check for equivalent like HCF4006B, HEF4006B, MC14006B or TC4006BP.

Search found 90 matches

Re: Chia Shin Knobs [Small Knobs are SOLD OUT] plz read

Re: Select OH

Re: Select OH

Re: Select OH

Re: Number of IC Sockets

Re: Cowbell...problem...or not?

Re: Greetings help with Noise Buld please

Re: Cowbell...problem...or not?

Re: About Mute and Roll in Pattern/Midi mode

Re: Secondary Noise Source Kit