Search found 19 matches
- Jul 27th, '17, 12:55
- Forum: Yocto v1.0 Hardware
- Topic: Wrong Voltage Noise Section
- Replies: 3
- Views: 4068
Wrong Voltage Noise Section
I know this has been discussed very often.. I only get 50mv at PIN1 U24 all resistors are correct in the noise section.. double checked it :) I tried everything.. R127 with 47K .. with 4,7K .. adjustable resistor..even if i go under 1k... nothing ;( where is my fault? the only what i did diffrently ...
- Jul 20th, '17, 10:43
- Forum: Yocto v1.0 Hardware
- Topic: Negative Voltage in Noise Section? U24 PIN1
- Replies: 2
- Views: 3343
Re: Negative Voltage in Noise Section? U24 PIN1
yepp.. that was my fault. and a cheap multimeter the next problem
in ac i only can´t measure mv...
thanks for the help!
in ac i only can´t measure mv...
thanks for the help!
- Jul 18th, '17, 17:51
- Forum: Yocto v1.0 Hardware
- Topic: Negative Voltage in Noise Section? U24 PIN1
- Replies: 2
- Views: 3343
Negative Voltage in Noise Section? U24 PIN1
I have read many threads about the 130mv at PIN1 U24 in the noise section.
I got around 240mv but negative ?! so now .. is this a measure fail or what? always -240 - -280 mv (depends on tm4)
i checked all my capacitors .. they are right.
any ideas?
best
sascha
I got around 240mv but negative ?! so now .. is this a measure fail or what? always -240 - -280 mv (depends on tm4)
i checked all my capacitors .. they are right.
any ideas?
best
sascha
- Jul 18th, '17, 16:32
- Forum: Yocto v1.0 Hardware
- Topic: Film-Capacitor in Noise Section
- Replies: 2
- Views: 3470
Re: Film-Capacitor in Noise Section
THANKS! again...
so many bags... have to order them again!!
so many bags... have to order them again!!
- Jul 18th, '17, 15:10
- Forum: Yocto v1.0 Hardware
- Topic: Film-Capacitor in Noise Section
- Replies: 2
- Views: 3470
Film-Capacitor in Noise Section
Heyho,
Just soldering the Noise Section.. Now i am at the point with the capacitors
Its about the C33 with the value of 18n
in the mouser bom there is only a pack (3x) 1,8n (0,0018uf)
The mouser nr is 647-QYX1H182KTP
So the BOM is wrong or do i miss something?
best!
sascha
Just soldering the Noise Section.. Now i am at the point with the capacitors
Its about the C33 with the value of 18n
in the mouser bom there is only a pack (3x) 1,8n (0,0018uf)
The mouser nr is 647-QYX1H182KTP
So the BOM is wrong or do i miss something?
best!
sascha
- Jul 4th, '17, 11:34
- Forum: Yocto v1.0 Hardware
- Topic: YOCTO 1.0 enclousures - LAST BATCH
- Replies: 39
- Views: 70565
Re: YOCTO 1.0 enclousures - LAST BATCH
any news? there is no hurry, but i got most of the parts and the kit... so the only thing that is missing is the case
best!
best!
- Jun 27th, '17, 20:56
- Forum: Yocto v1.0 Hardware
- Topic: Capacitor in PSU wrong?
- Replies: 3
- Views: 4181
Re: Capacitor in PSU wrong?
Thanks! That was my first thought... but i was not sure
one moore question maybe...
In the Noise Section is the Capacitor C31 (50V1uf) But in the BOM is only a 50V 10uf .. hmm..
or am i blind?
can i use the 50 V 10uf ? i dont guess...or?
one moore question maybe...
In the Noise Section is the Capacitor C31 (50V1uf) But in the BOM is only a 50V 10uf .. hmm..
or am i blind?
can i use the 50 V 10uf ? i dont guess...or?
- Jun 27th, '17, 08:02
- Forum: Yocto v1.0 Hardware
- Topic: Capacitor in PSU wrong?
- Replies: 3
- Views: 4181
Capacitor in PSU wrong?
Hey,
I am just sort all Parts from the Mouser Bom...
Probably a beginner question The Building Guide says in the Powersupply that i need 1 680uf 35v capacitor...
But in the BOM is a 680uf 25v capacitor.
Can i use it anyway or would it be better to get a 35v version?
thanks in advance!
Sascha
I am just sort all Parts from the Mouser Bom...
Probably a beginner question The Building Guide says in the Powersupply that i need 1 680uf 35v capacitor...
But in the BOM is a 680uf 25v capacitor.
Can i use it anyway or would it be better to get a 35v version?
thanks in advance!
Sascha
- May 30th, '17, 16:32
- Forum: Yocto v1.0 Hardware
- Topic: YOCTO 1.0 enclousures - LAST BATCH
- Replies: 39
- Views: 70565