e-licktronic Forum

ElSchtroumpf

These will be printed boxes, and will only be sold with all the accessories, except the cable shoes, for about 117€ without shipping. The shipping cost will be displayed when checking out.

ElSchtroumpf

There will be a small batch of 30 enclosures coming up for sale on the e-licktronic website very soon !

ElSchtroumpf

I have that problem all the time when working on old Soviet gear. Some of those PCBs are just crap. Do you still have the solder pad? I usually start by trying to glue them to the board if it's a long trace or if the pad is gone. Or bend the lead to keep the trace in place. If the solder pad is gone...

ElSchtroumpf

Check all the ics in the sequencer section to make sure they're all soldered properly and in the right direction. That's probably a good starting point.

*edit* Just saw your other post with the same advice.

ElSchtroumpf

Thanks for the kind words!

For anyone still interested in an enclosure, keep an eye on this thread in the week to come!

ElSchtroumpf

After almost one and a half year I finally got the last pieces I needed to finish my Yocto. Yesterday I got a package from Thonk with my knobs, and this is what it looks like now : https://dl.dropboxusercontent.com/u/48624479/YoctoFinished1.jpg https://dl.dropboxusercontent.com/u/48624479/YoctoFinis...

ElSchtroumpf

I'm not sure I understand what you mean by "installed but not soldered in"

The values at the opamp power inputs deviate quite a lot over the board. I'd say don't worry about it, and finish the build. If the sound or volume is off you can come back to it.

ElSchtroumpf

For the tempo knob I tried this one : http://www.banzaimusic.com/Sun-Dial-Knob.html but it's too small to have the same look as the original. But there's not much freedom there since the print for the tempo ring has a much smaller diameter than the 808. Then again, you could just use a bigger knob a...

ElSchtroumpf

Hi guys, I've been searching for good looking knobs for the Yocto for a few months now, and I have found some interesting stuff, but nothing ideal. I was wondering if anyone else had been searching for knobs, or had bought something for their Yocto. Here's what I found so far : For the Tempo and mas...

ElSchtroumpf

Do you see the trigger signal for the closed hat? It enters at R16*, R17*, Q7* and Q8*. Might be worth checking out those two transistors.

Search found 180 matches

Re: Exploring other enclosure options.

Re: Exploring other enclosure options.

Re: Pulled up solder pad and trace on jp4!!

Re: a few ? about my finished yocto and leds lighting on/off

Re: Exploring other enclosure options.

Re: Yocto successfully completed build thread

Re: im getting less than 15v to 4558 op amp in cymbal

Re: The Knob Quest!

The Knob Quest!

Re: Closed Hi Hat - No Sound