Search found 19 matches

Go to advanced search

by sequentialmood
Oct 31st, '18, 00:07
Forum: Nava Hardware
Topic: RIMSHOT NO SIGNAL at J4 [SOLVED]
Replies: 1
Views: 2761

Re: RIMSHOT NO SIGNAL at J4 [SOLVED]

After debugging the issue with the schematics, i've found that there were not continuity between C122 and NON_INV_INPUT2 of IC50 (see below) By looking more precisely to the joints of IC50, i found that one of the pin was not soldered... :shock: so I've soldered the missing joint, and got now a full...
by sequentialmood
Oct 30th, '18, 00:27
Forum: Nava Hardware
Topic: RIMSHOT NO SIGNAL at J4 [SOLVED]
Replies: 1
Views: 2761

RIMSHOT NO SIGNAL at J4 [SOLVED]

Hello, About to finish a fully working NAVA! :P Last instrument with a problem is the RIMSHOT : No sound on output (main & dedicated) After some tests, it seems that there's no signal (on scope) on J4 (on the main board). i've measured all the different labeled points of the instrument on the PC...
by sequentialmood
Oct 29th, '18, 21:40
Forum: Nava Hardware
Topic: SNARE signal on J11 on IO board but no output [SOLVED]
Replies: 1
Views: 2603

Re: SNARE signal on J11 on IO board but no output

OK !!
I printed the schematics and followed the flow from Snare instrument until the output jack.
reheat some joins around j11 and IO board, and the snare is back ! 8-)
by sequentialmood
Oct 28th, '18, 22:09
Forum: Nava Hardware
Topic: SNARE signal on J11 on IO board but no output [SOLVED]
Replies: 1
Views: 2603

SNARE signal on J11 on IO board but no output [SOLVED]

Hello!

My snare stops to make sound lately. :(

After few tests it seems that i've got signal on Pin 2 of J11 on the IO board, but no sound on main output or Snare dedicated output neither.
Where should I search next on the I/O board ?

Thanks!
by sequentialmood
Oct 21st, '18, 13:13
Forum: Nava Hardware
Topic: LOW BASS DRUM VOLUME
Replies: 9
Views: 14734

Re: LOW BASS DRUM VOLUME

Hi there,

Any news on the low kick drum volume issue resolution ?
by sequentialmood
Jan 31st, '18, 08:01
Forum: Nava Hardware
Topic: Fresh 1.02 build // no SN, no RIM, HC with infinite decay
Replies: 4
Views: 4567

Re: Fresh 1.02 build // no SN, no RIM, HC with infinite deca

bump!
by sequentialmood
Jan 31st, '18, 08:01
Forum: Nava Hardware
Topic: Nava 1.02 // BD attack has no effect
Replies: 3
Views: 3858

Re: Nava 1.02 // BD attack has no effect

bump!
by sequentialmood
Jan 14th, '18, 13:06
Forum: Nava Hardware
Topic: Nava 1.02 // BD attack has no effect
Replies: 3
Views: 3858

Nava 1.02 // BD attack has no effect

Hello,

My Bassdrum seems to sound OK but the attack knob doesn't have any effect on the sound.

Where could i start to search to diagnostic the problem?

Thanks for the help!
by sequentialmood
Jan 14th, '18, 13:03
Forum: Nava Hardware
Topic: Fresh 1.02 build // no SN, no RIM, HC with infinite decay
Replies: 4
Views: 4567

Fresh 1.02 build // no SN, no RIM, HC with infinite decay

Hello, I've finished my Nava 1.02 build few weeks ago. Here are my remaining problems : - RIM & Snare are not working : no sound from master or individual out. For the snare, when i push the master volume to max, i can hear a really low level hit when trigged by the sequencer. - HC clap has an i...
by sequentialmood
Dec 17th, '17, 21:59
Forum: Nava Hardware
Topic: NAVA 1.02 // new build finished // Nothing lights on
Replies: 5
Views: 5050

Re: NAVA 1.02 // new build finished // Nothing lights on

OK, it seems that Gnd from the IO board is not in continuity with some ground points on the sequencer part...digital ground is not grounded...
I had to put a jumper on R40 to make it worked.
No hint about this in the build guide...
now the sequencer and display are running OK. :D

Go to advanced search