e-licktronic Forum

rkzr

*SOLVED - replaced 1 resistor which was showing weird readings + 1 new capacitor in BD section + replaced 1 capacitor (C31) in NOISE section! BD sounds like a boooooom!

rkzr

Hej Kazper, yes twisted the knobs. Next step check all resistors. Already soldered every resistor again on both sides of the PCB to be sure...

rkzr

SOLVED - cold joint was causing the problem due to the turning of the board a couple of times. Resoldered the reistor back and front of the PCB and it works fine now

rkzr

Hi rv0 and SubStyler, thanks for the info! I will into it.

rkzr

Anyone any idea why this is?

*SOLVED - cold joint due to the turning of the board a couple of times, resoldered resistor back and front of the PCB

rkzr

Hi pistrix, i wish it was that simple

This is a bit more serious.

rkzr

For instance when select BD and program in sequencer it triggers LT / Same for AC that triggers SN??!

rkzr

Anyone has an idea on this?

rkzr

when selecting CB through NC all lights go off and can't select anything in the sequencer? Anyone else has this problem???

*SOLVED - cold joint next to the selector due to turning the board over a couple of times. Resoldered it back and front of PCB and works like a charm now

rkzr

Anyone has this problem too? It just sounds like a clicky noise.

Search found 22 matches

Re: BD sounds just as a click?! *SOLVED

Re: BD sounds just as a click?!

Re: Instr. selector selects wrong instruments? *SOLVED

Re: Instr. selector selects wrong instruments?

NC button on sequencer is always lit when not playing SOLVED

Re: Instr. selector selects wrong instruments?

Re: Instr. selector selects wrong instruments?

Instr. selector selects wrong instruments?

Instrument selector not working properly *SOLVED

BD sounds just as a click?! *SOLVED