e-licktronic Forum

jeremy

I'll email you as well.

Do you still have any?

Would you ship to the U.K, if so, how much?

Thanks

jeremy

Would it be possible to implement an LCD display to show the tempo?

jeremy

With the DC supply you're using you'll receive the 0v/GND +15v and +5v (as this is the +15V stepped down), you will not however receive the -15V as you're aware. I drew a little diagram below to demonstrate why this is, hopefully it'll help everyone understand. :) http://i1024.photobucket.com/albums...

jeremy

Searching 'clap' returns no results so i'll ask here.

Is there any way I can change the decay time and the mix of the reverb on the clap as i'm not a particular fan of it right now.

Thanks,

jeremy

You need an AC output supply, found here https://www.esr.co.uk/electronics/produ ... pplies.htm.

jeremy

You need a supply that outputs AC not DC, then you shall see the -15v. Been there, done that! ;) http://www.mouser.com/ds/2/323/PSX15R-553264.pdf - This is the datasheet for the supply you bought (same one as I did), scroll down a little and you'll see that it states DC Output. You need something li...

jeremy

gihaume wrote:About 2nd question, if you installed an internal voltage transformer, this is common.

Thanks for your reply however, I don't have an internal transformer, instead an external line lump.

Cheers anyway!

jeremy

Hi! A typo I guess, VR14 is the Hi Tom's volume pot, A104. VR15 being the tuning pot value 500R. I'm not that sure, my guess would be to check D84 and then D85 (Germaniums) to make sure they're the right way round, with the two red lines matching the white one on the silk screen. Hope this is of som...

jeremy

Hi everyone, My Yocto is complete, bar a case. It's working, first time with no (2 v small) issues. I'd just like to thank everyone who has helped along the way, given advice etc!! Regarding TM3, I didn't see much about calibration however for those who don't know, when you start up your Yocto, play...

jeremy

1. I've found it very useful to cut up a Molex header into four 'prongs' and solder them in place of the 15+, 15-, gnd and 5+ input on the main board. I then soldered some croc clips to the wires from the IO board, this way when soldering components the power cables can be easily removed making it m...

Search found 18 matches

Re: Metal YOCTO enclosures for sale

Tempo LDC display

Re: Yocto projekt ( work in progres ) No -15V only 0v

Clap mods.

Re: -15 v Getting 0V on PSU

Re: Yocto projekt ( work in progres ) No -15V only 0v

Re: IT WORKS, PERFECTLY, FIRST TIME!

Re: VR14 (Hi Tom Tune) does not do anything.

IT WORKS, PERFECTLY, FIRST TIME!

Useful Building Tips