e-licktronic Forum

Fabi_303

The +/-15V supply is just a simple linear regulator supply, nothing fancy there. So as long as the voltage rating is the same or higher and they physically fit on the pcb, going up in capacity will not cause any problems. Very large capacitors may cause the supply rails to ramp up slowly, but just d...

Fabi_303

I'm still waiting for my Yocto Kit, so cannot tell for sure, but from looking at the PCB pictures the PSU looks straight forward, the LM2596 is for the +5V supply, which is working. In front of the 7815 / 7915 is just a bunch of rectifier diodes and thats all. You also have no input voltage in betwe...

Fabi_303

As already suggested, I would first disconnect the PSU Board from the main board and measure the
+/-15V supply voltages directly on the PSU board.

Fabi_303

Checking the voltages with ICs soldered is fine.

Fabi_303

Did you check the +/-15V supply on all ICs during the build (as stated in the build instructions)?

Fabi_303

Metal work looks really nice.
The final case will have the 3 color silkscreen printed frontpanel based on
ElSchtroumpf design as shown on the 1st page of this thread?

Search found 6 matches

Re: Power capacitor

Re: Yocto build - Click sound and no instrument sounds

Re: Yocto build - Click sound and no instrument sounds

Re: Yocto build - Click sound and no instrument sounds

Re: Yocto build - Click sound and no instrument sounds

Re: Yocto Metal Box EU - Group Buy