Search found 36 matches
- Jun 7th, '15, 21:33
- Forum: Yocto v1.0 Hardware
- Topic: Cymbal and hihats issue (SOLVED)
- Replies: 12
- Views: 9367
Re: Cymbal and hihats issue
Have you checked all your solder points in the circuit to see if maybe there is short somewhere? Have you gone back through and confirmed you have the correct resistors where they belong. All caps in the right direction? Did you socket all your IC's? Did you have any parts left over when you finishe...
- Jun 6th, '15, 18:04
- Forum: Yocto v1.0 Hardware
- Topic: Testing routine
- Replies: 3
- Views: 3635
Re: Testing routine
If you pick up an arduino when can test the instruments while you build. That's the best way to know what's up before you build the entire thing and turn it on to find out things are out of whack.
- Jun 6th, '15, 00:09
- Forum: Yocto v1.0 Hardware
- Topic: output clips when fully cw
- Replies: 2
- Views: 2978
Re: output clips when fully cw
Yes I get it regardless of the output I use. I have a suspicion it has something to do with the accent because when I turn it down it goes away. Come to think of it though, I can also make it go away if I back off the master as well. ???
- Jun 4th, '15, 18:09
- Forum: Yocto v1.0 Hardware
- Topic: output clips when fully cw
- Replies: 2
- Views: 2978
output clips when fully cw
lol, it seems like every time a fix one issue another pops up! So after fixing the low tom due to a bad opamp, I am near completion of the build and everything makes the correct sound. However, when I have the master volume all the way up some sounds start to clip...the toms mostly and mainly when i...
- Jun 4th, '15, 18:02
- Forum: Yocto v1.0 Hardware
- Topic: no low Tom and r237 is HOT(RESOLVED)
- Replies: 4
- Views: 4303
Re: no low Tom and r237 is HOT
Vincent, you were correct! It was a bad opamp.
- Jun 4th, '15, 08:05
- Forum: Yocto v1.0 Hardware
- Topic: no low Tom and r237 is HOT(RESOLVED)
- Replies: 4
- Views: 4303
Re: no low Tom and r237 is HOT
Thanks for the reply. U15 is in the correct direction, The tom has been working and only stopped after I did the noise revision that's in the service manual. This is why I am confused as to why it would stop. I upgraded the opamp in the master section so I have a spare 4558 I will put in to the circ...
- Jun 3rd, '15, 21:27
- Forum: Yocto v1.0 Hardware
- Topic: no low Tom and r237 is HOT(RESOLVED)
- Replies: 4
- Views: 4303
Re: no low Tom and r237 is HOT
It actually looks like both R236 and R237 are getting hot...
- Jun 3rd, '15, 18:38
- Forum: Yocto v1.0 Hardware
- Topic: no low Tom and r237 is HOT(RESOLVED)
- Replies: 4
- Views: 4303
no low Tom and r237 is HOT(RESOLVED)
Did service manual noise revision and have solved my 130mv problem. My issue is now I'm no longer getting a low tom/Congo sound and only hear the noise. Also r237 right above the low Tom is getting extremely hot. I'm not sure on what it is R237 is responsible for. I've looked around and don't see an...
- Jun 3rd, '15, 18:00
- Forum: Yocto v1.0 Hardware
- Topic: Noise section revision in service manual
- Replies: 11
- Views: 10228
Re: Noise section revision in service manual
Thanks. I found that post with the schematic and figured it out. It did the trick in allowing me the range to get to 130mv. But now I have another issue. I'm no longer hearing the low Tom /Congo or hi tom but can hear the conga in this section. The only thing I hear is the noise...nothing else. I'm ...
- Jun 2nd, '15, 22:25
- Forum: Yocto v1.0 Hardware
- Topic: Exploring other enclosure options.
- Replies: 433
- Views: 411438
Re: Exploring other enclosure options.
That's great news! Will they be blank of screen printed? What will the cost be?