e-licktronic Forum

BastienL

Considering the size of the power supply and the fact that it takes 100 to 240V, it means it's probably a switching power supply and therefore 15V DC, and you need 15VAC actually to power your Yocto. Here is the one listed on the Yocto page https://www.jameco.com/webapp/wcs/stores/servlet/Product_10...

BastienL

e-licktronic wrote:Last update v1.025 online (HEX file included)

Did the update and no more problem with Expander mode, thanks!

BastienL

Hi, Sorry I didn't really understood what you were explaining about the internal sequencer, but yeah there's some weird things going on with the different accents with the internal seq too, but it seems that playing the sequence for 1 or 2 bars makes everything goes to normal. I've tried replacing c...

BastienL

I've been experiencing the same issue with 2 Nava (1.0l and 1.02 boards) and firmware 1.024 + accent boards, drum voices fades out when played in MIDI, but not with the internal seq. There's only the handclap and the lowtom that still play after 10-20 seconds. I tried to replace the chips on the acc...

BastienL

I've been experiencing the same issue on 2 Nava so I was looking for feedback on the last upgrade+update so I posted here http://www.e-licktronic.com/forum/viewtopic.php?f=25&t=1118&start=30#wrap It seems my internal sequencer and accent is working as it should but I got the same problem wit...

BastienL

- sending MIDI triggers into the Nava seems to be completely unreliable. What I experience is, if I send a low velocity trigger to one of the instruments, until I play the internal sequencer, that sound will never sound louder than the lowest velocity trigger it was sent. I experience the same issu...

BastienL

Just tried the firmware and that's pretty cool that the roll function works in Midi Slave now! I noticed the same issue as mentionned before, BD, SD, LT, MT, HT, RS (but not CL) and CB are a bit lower when rolled in Midi Slave mode, however there's no issue when using roll with the internal clock. A...

BastienL

e-licktronic wrote:
BastienL wrote:Great news!

I'm not able to fill the form though, it seems to be in "read only".

Thanks!
Please try again and let me know

Works now, thanks!

BastienL

Great news!

I'm not able to fill the form though, it seems to be in "read only".

Thanks!

BastienL

The1.8n Nichicon QYX that are used have a lead spacing of 2.56mm. Generally film box capacitors comes with a 5.08mm lead spacing, the one you mentionned is 7mm, so I would recommend to check for a 5.08mm one (like this one http://www.mouser.fr/ProductDetail/KEMET/MMK5182K50J01L4BULK/?qs=sGAEpiMZZMv1...

Search found 90 matches

Re: PSU 15Vac 1000mA

Re: Nava v1.0 Firmware

Re: ..::MUX_SH::.. Confused about some problems

Re: Mux/sh problem 1.024

Re: ..::MUX_SH::.. Confused about some problems

Re: Official Nava BUGS list

Re: Unoffical Firmware Available

Re: Nava Last Update: Accent improvement

Re: Nava Last Update: Accent improvement

Re: Yocto2 Mouser BOM... Obsolete components?