Search found 3 matches
- Feb 22nd, '21, 20:12
- Forum: Nava Hardware
- Topic: Encoder Actuation Issue
- Replies: 2
- Views: 1869
Re: Encoder Actuation Issue
That was it. My repair work is pretty ugly because I had go to directly from the encoder pin to the atmega pin with wire, the via was just too fragile. But it worked... Onto some deeper testing for this one.
- Feb 22nd, '21, 19:48
- Forum: Nava Hardware
- Topic: Encoder Actuation Issue
- Replies: 2
- Views: 1869
Re: Encoder Actuation Issue
I'm not seeing 5v on the ATMega at ENC_SW when pressed. The pin stays low when the push button is depressed, so there is no state change detection. But 5v is working on the switch itself. Looks like a via would've connected it to one of the encoder pins, but the pad had been completely burned, so th...
- Feb 22nd, '21, 00:05
- Forum: Nava Hardware
- Topic: Encoder Actuation Issue
- Replies: 2
- Views: 1869
Encoder Actuation Issue
I bought a Nava 909 with V1 boards running V1.028beta with issues - for parts or repair. The issues turned out to be mostly cold solder joints in the audio sections - the Kick was missing, etc. The issues remaining are: - In the Snare drum section, at IC34 an M5218 was bent backward and snapped off ...