e-licktronic Forum

cstockwell

I tested again yesterday and all seemed to work fine. However i have checked again today and i cant get the -15v or +5v. I previously found a post which i can't find again, but some people have mentioned something about using a resistor to get one of the capacitors going (this could be incorrect but...

cstockwell

That PSU looks fine. I wouldn't connect the main board until you sort the power section. Would suggest you have a wrong component or missing / bad part in there. Check the pins of the VRs. All electrolytics the right way round etc. Thanks for getting back to me on this. All pins and components look...

cstockwell

I'm in the UK and may need someone to build/finish my Nava Extra 9 if i get stuck. Can anyone let me know of anyone that may be able to help just so i know its an option??

cstockwell

Hi guys, is there a mouser BOM for all IC sockets if i chose to use them instead of soldering all ICs direct? Or could any body point me in a direction so i could wrk out which sizes i need for each one?

Thanks

cstockwell

Can any body tell me if this is the correct power supply? https://www.poweradaptorsuk.co.uk/1000ma_15v_AC_AC_Power_Adaptor_p/ta100015ac.htm I have this unit and have connected it to test the power board of my Nava9 but the readings aren't correct. I get -20v on the -15v pin, and then nothing on the ...

cstockwell

Newbie here hoping someone can help... On the PCB silkscreen bottom image, Am i right in saying that the blue lines are showing the connections inside the board? link: http://www.e-licktronic.com/en/index.php?controller=attachment?id_attachment=50 D3 & R186 in the noise section are both so close...

Search found 6 matches

Re: Power issues - is this the right power

Re: Power issues - is this the right power

Re: Nava Builders (Who can build me a Nava?)

IC Sockets

Power issues - is this the right power

Nava9 PCB silkscreens question