e-licktronic Forum

whomper

Price drop to 850 euro

whomper

Hi,

Selling my Yocto2 as I need the money. Its in great working condition as you can see from the pictures.
Asking 950 Euro plus shipping.

whomper

I have performed the modification and used BA662 in both cases, but I noticed a higher noise level on the claps output than with the 6110, so I reverted back to 6110 as I did not notice any sound difference.

whomper

Hi,

As I find it challenging working with Yocto2 in slave mode (its loosing sync) I tried to make it a master, but my sequencer does not sync to it at all.

Have others successfully setup their Yocto2 to control external sequencers?

whomper

Hi,

Any thoughts on Yocto2 unofficial firmware? My Yocto2 has some functional issues that limit my ability to properly work with it in production manner.

whomper

Hi, Just found out today that if you press two pattern buttons together, they form an A+B pair, just like in the 808. If you press two buttons that are not close one to the other, a range is selected all the way to a 16 pattern range!! The issue I've noticed is the first pattern run after selecting ...

whomper

Did some more testing with the SD sound using front panel button and MIDI trigger. It seems the TONE setting behaves differently: When triggered from front panel, turning the Tone control has a lower range of change versus when triggering from MIDI, where it has a more pronounced effect. All the way...

whomper

I just experienced that as well. When focusing on the SD for example, the sound is a bit more "woody" using MIDI vs. the internal trigger, which to me is less desirable. It seems like the internal balance between the tone generators of each sound is different, which is more than just a vol...

whomper

When using slave mode to start/stop the sequencer, the pattern is played starting from last step and not step 1. This makes syncing to an external sequencer almost impossible. Suggestion: External MIDI start/stop commands operate like the START front panel button and not the STOP/CONT one. Also, is ...

whomper

Further testing indicate that MCP4822 pin8 is outputting around 0.06v and not the reference voltage of 2v (or 4v in case the DAC is instructed to issue the double voltage). This could be due to a defective MCP4822.

Search found 15 matches

Re: FS: Yocto2 in great condition

FS: Yocto2 in great condition

Re: BA662 mod for Clap

Yocto2 as Master Sync

Re: Unoffical Firmware Available

Pattern A & B Together

Re: Sounds Different when Using External Midi

Re: Sounds Different when Using External Midi

MIDI START/STOP

Re: Lost triggers, TP1 at 0.2v