Search found 18 matches
- Oct 28th, '20, 20:21
- Forum: Yocto² Hardware
- Topic: Clap Question, is this normal?
- Replies: 0
- Views: 27075
Clap Question, is this normal?
I just finished my yocto and everything sounds great except for the clap in my opinion. Before I start replacing caps and transistors I have a couple questions regarding the issue if anyone could help.. -When calibrating and turning TM3, if I turn to the right, the clap eventually gets more distorte...
- Oct 28th, '20, 20:05
- Forum: Yocto v1.0 Hardware
- Topic: Yocto Noise with toms pots + sound leakage when pots down
- Replies: 6
- Views: 17258
Re: Yocto Noise with toms pots + sound leakage when pots dow
I think I have the same issue, I can hear the trigs leak out of the main output even with everything turned down.
- Jan 4th, '18, 16:26
- Forum: Yocto² Hardware
- Topic: Sequencer / Buttons dont work HELP
- Replies: 2
- Views: 4192
Re: Sequencer / Buttons dont work HELP
Near the bass drum circuit, I started removing all components that are on the bass drum circuit where I think it hit.
- Jan 2nd, '18, 21:13
- Forum: Yocto² Hardware
- Topic: Sequencer / Buttons dont work HELP
- Replies: 2
- Views: 4192
Sequencer / Buttons dont work HELP
So just when I managed to solve one thing, I fucked someting up on the sequencer, Accidentally my solder fell on the board and something shorted out, i smelled burnt plastic but could not locate anything that look damaged, now it turns on but none of the buttons work and I cant play anything, I can ...
- Dec 20th, '17, 00:27
- Forum: Yocto² Hardware
- Topic: Bass Drum Tone not working
- Replies: 8
- Views: 7170
Re: Bass Drum Tone not working
My snare accent doesnt work either, The kick is a bit more quiet than the snare but It could be that the high end click is not in there..
I tested a bad diode and cap in the bd circuit, will update after I replace.
I tested a bad diode and cap in the bd circuit, will update after I replace.
- Dec 18th, '17, 17:11
- Forum: Yocto² Hardware
- Topic: Bass Drum Tone not working
- Replies: 8
- Views: 7170
Re: Bass Drum Tone not working
Still struggling with this issue, Please check video and recording- I noticed the 4051 was very hot, ended replacing that chip and is fine now, Seems like the accent doesnt work nor am i getting the kick click punch. How can i test the accent circuit from start to end and ensure everything is workin...
- Dec 12th, '17, 15:56
- Forum: Yocto² Hardware
- Topic: Bass Drum Tone not working
- Replies: 8
- Views: 7170
Re: Bass Drum Tone not working
Not yet, waiting for a replacement pot to come and after that debating swapping the 4558. I have triple checked all component orientations so it's not that, I also should add the decay is a little weird and when two notes are close to each other it sounds like the second one is much louder than the ...
- Dec 10th, '17, 23:15
- Forum: Yocto² Hardware
- Topic: Bass Drum Tone not working
- Replies: 8
- Views: 7170
Re: Bass Drum Tone not working
Your pot is probably fine. First check diode and transistor orientation. Then look at the schematic and trace it backwards. But I'm guessing you will find a diode backwards. acetate - thanks for the suggestions, I double checked diodes and cap orientation, everything looks good. I reflowed pretty m...
- Dec 10th, '17, 22:17
- Forum: Yocto² Hardware
- Topic: Yocto² Mouser BOM Official Thread
- Replies: 26
- Views: 38375
Re: Yocto² Mouser BOM Official Thread
Is this the switch that comes with the kit? https://www.rapidonline.com/diptronics- ... ed-78-1730
I have one that doesnt work and needs replacing.
I have one that doesnt work and needs replacing.
- Dec 6th, '17, 17:54
- Forum: Yocto² Hardware
- Topic: Bass Drum Tone not working
- Replies: 8
- Views: 7170
Bass Drum Tone not working
I got my bass drum working and seems that im only getting the low end and not the nice punchy top end sound with it, I noticed that vr5 has no effect at all on the sound, I have removed vr5 and waiting for a replacement, can I put someting on vr5 in the meantime to make sure its nice and punchy? Whi...