Search found 47 matches
- Nov 20th, '17, 01:17
- Forum: Yocto² Hardware
- Topic: Bass Drum Decay Issue SOLVED
- Replies: 4
- Views: 4250
Re: Power Issues SOLVED
You need to be sure you have the boards cabled together correctly. Wiring up J1 -> J11 will get you sound out of the individual out. Wiring up J6 -> J14 will also get you sound out of the master. Also ensure that your power cable (big 4 pin) and sequencer cable (8 pin) are connected (these ensure yo...
- Nov 19th, '17, 18:19
- Forum: Yocto² Hardware
- Topic: Bass Drum Decay Issue SOLVED
- Replies: 4
- Views: 4250
Re: Power Issues
I'm certainly not an expert here but I can tell you what I would do in your shoes. Since the noise section feeds into the bass drum I would troubleshoot the noise section. You can trace through the schematic (page 6) and focus on the components before TP4. I would check the input into the noise sect...
- Nov 15th, '17, 02:17
- Forum: Nava Hardware
- Topic: NAVA 1.02 Layout
- Replies: 12
- Views: 11401
Re: NAVA 1.02 Layout
Did you test the voltage coming out of the power supply section on the IO board? Double check your wiring of the IO board to the main board and ensure that you connected pin1 to pin1, etc.
- Nov 6th, '17, 04:34
- Forum: Yocto² Hardware
- Topic: Noise problem
- Replies: 14
- Views: 17908
Re: Noise problem
Did anyone get to a root cause on this issue? I can't adjust below 320mV. Should I just order a larger trimmer?
- Nov 5th, '17, 04:32
- Forum: Yocto² Hardware
- Topic: Connecting I/O Board with the Mainboard
- Replies: 7
- Views: 7118
Re: Connecting I/O Board with the Mainboard
Thanks Vincent. Did you mean to leave off J12 -> J3 or was that an oversight?
- Nov 1st, '17, 00:23
- Forum: Yocto² Hardware
- Topic: Connecting I/O Board with the Mainboard
- Replies: 7
- Views: 7118
Re: Connecting I/O Board with the Mainboard
I am confused by this as well. I get that pin1 on the IO board must connect to pin1 on the main board. The question is which set connects to which set of pins. Nuclues were you able to figure this out? On the IO board there are four 4-pin connectors (J8, J11, J12, J13), one 6-pin (J14), and one 8-pi...
- Oct 21st, '17, 15:35
- Forum: Yocto² Hardware
- Topic: Alternative Yocto 2 Enclosures?
- Replies: 4
- Views: 5139
Re: Alternative Yocto 2 Enclosures?
I just exchanged emails with Erika Synth and they are expecting cases for Yocto2 the week of October 30. I was holding my kit order until I got this confirmation.