e-licktronic Forum

cablebasher

Hey man Sorry for he late reply. I decided to leave it a few days as I didn’t want to open it up again. It now seems fixed without me doing anything. It’s weird, for the first few days every time i pressed start it doubled or triple pressed and now it works perfectly ever time. I guess it just neede...

cablebasher

Hey man Thanks for the reply. Yeah the a4 is set up for clock receive and transport receive but not starting from the yocto. Is there anything I need to do on the yocto to initialise the midi out? I’m assuming I should just have it in pattern play mode and hit start and it should send out midi clock...

cablebasher

Hey guys

I am all built and working but I am confused by the midi out.

Midi in, din sync in and expander mode work but not midi out

I assume it sends out midi start/stop and tempo info from the sequencer but I cannot get it to start my analog four.

Am i missing something?

cablebasher

Yes the start/stop is bouncing.

Do you have a photo of your nava with the cap fix installed?

Which is the 4 contacts in the button do I put the cap across?

Once that’s sorted I’m done!!!

cablebasher

Hey man Thanks for info. Yeah once you enter the digital domain electronics gets a lot more complicated! I did however get it fixed. I found on the schematic that all the things that didn’t work (start/stop, mute, roll, scale) were all controlled by IC7. I swapped the IC but no difference so I did a...

cablebasher

Dudes So all the soldering is done and she’s in the metal case. Hooray. A slight (?) issue.... The start/stop button doesn’t do anything. However step 9 (CB) acts as a start stop button. I can start/stop patterns by pressing step 9. Most other things seem to work sequencer wise and all the sounds wo...

cablebasher

Dudes I got my case for a yocto 1 in October 2017. It had some issues (no accent label on the front panel; just an empty space, the I/O holes were all too small and the screen print was coming off with my nail barely touching it) I decided to live with this all, due partly to not wanting the hassle ...

cablebasher

hey guys so i made it as far as the cowbell and all is good so far I want to test the cowbell but notice on the schematic that there are 2 trigger points rather than the normal one: one trig going to R14 and another one going to R19 & 18. Do i need to send a trig to all 3 resistors to hear a sou...

cablebasher

Thanks for the info man. Yeah, i've resoldered the whole of the 5v section (which as I have not done the sequencer yet, is just the accent) and also checked for a short between 15v and 5v which i don't have. So hopefully when I solder the I/O it will go away like on your build. I wont insert the seq...

cablebasher

Hey dudes So I’ve started my build. I have the done the accent and the bass drum. I’ve noticed that when I turn the accent pot up all the way, the 5V power rail increases from 5V to 7.5V. With the accent pot closed or up to 50% I get 5 volts everywhere on the 5V rail. At the moment I have nothing bu...

Search found 17 matches

Re: Soldering done, nearly there, slight sequencer issue

Re: Yocto midi out what does it do

Re: Yocto midi out what does it do

Re: Soldering done, nearly there, slight sequencer issue

Re: Soldering done, nearly there, slight sequencer issue

Soldering done, nearly there, slight sequencer issue

Re: COCTEAU!!!! (mod PCB for your YOCTO 808 clone)

Re: Testing each sounds as I build

Re: 5V rail changing to 7.5v with accent pot

5V rail changing to 7.5v with accent pot