e-licktronic Forum

SOM

well... tried to solder 2 new transistors (q59 q60) absolutly no change ;) i thought there is a chance as it looks like they are responsible for trigger/accent... but no effect, problem stil here! the 2sk30 transistor has probably nothing to do with it?! the values of the resistors are ok, at least ...

SOM

just to let you know..
i have the same problem. My Nava doesn´t triggers my SH101... dont know why...

WIth my Yocto it works perfect.

SOM

ok.. thanks for the good explanation!

is it possible that Q59 or Q60 are damaged? i mean is the problem a sign of a damaged transistor?
i might have one 733 .. can i use any 2sc945 ? i thik these are standard..
but first i will measure all the resistors.

THANKS !!

SOM

ok.. thanks for the hint!
first.. the trigger problem was from the beginning when i finshed the yocto.
is this right when i see in the schematic that the trigger "input" signal comes in at R299.
and what is the right value? i am not so pro in that

SOM

hey! I don´t find the problem.. so i uploaded a audiofile. maybe somebody can help me out and give me a hint where my problem is. I always hear a click on evry step in the CLAVE/RIM Section. even there is nothing programmed. and its only in this section.. no other instrument. In master out and in th...

SOM

Thanks for the advice..
It was the 7915

Now the Yocto is running again. Only the problem with the "low volume" triggering in the RIM Section.
i mean you can hear every step but not loud. and he plays no sound, only a click on every step.
any ideas?

BEST!

SOM

Thanks for the reply! well.. it worked fine till i fired one of the regulators. of course there could be moore damage in the psu. i tried to meassure with the 7915 +15V --- Ground -> 40k -15V --- Ground -> 5k without the 7915 +15V ----- Ground -> 40k -15V ---- Ground -> 4,5M Ohm I am no expert but w...

SOM

just a update... this sound i hear in the CLAVE/RIM section is in "both" instruments. i can program the sound.. that works but its like the sequencer triggers every step without a sound, hard to explain... but now .. well.. today i tried to find a cold solder point as long as the seqeuncer...

SOM

hey, i just finished the yocto except the cymbals and hh section.. i miss there 1 resistor and 1 capacitor.. but i had to try it if it works :) j well.. it does. as far as i can tell at the moment.. but what really is not okay is that i can hear the clave on every step (but very low volume) i can se...

SOM

I use the same Powersupply for the NAVA. I dont understand why some people get the voltage without this mod?! R129 Jumper R131 100k R127 10uf capcitor R130 parrallel a 22pf capacitor at least it works this way! :D http://www.bilder-upload.eu/thumb/a1c85b-1501177798.jpg I read this mod but i thought ...

Search found 19 matches

Re: Still a problem in my CLAVE/RIM SECTION

Re: Trig out - SH-101

Re: Still a problem in my CLAVE/RIM SECTION

Re: Still a problem in my CLAVE/RIM SECTION

Still a problem in my CLAVE/RIM SECTION

Re: Clave is triggering everystep.. low volume

Re: Clave is triggering everystep.. low volume

Re: Clave is triggering everystep.. low volume

Clave is triggering everystep.. low volume

Re: Wrong Voltage Noise Section