e-licktronic Forum

helectromagneticus

I think Gihaume is talking about trimmer TM3.

helectromagneticus

Hi ppl! I got the latest unofficial firmware installed and now I found some "bug" or at least, some annoyance (to me). The thing is, the Yocto loses the status of the muted instruments when switching between "Edit" and "DinSync" mode (at least when it is not running). ...

helectromagneticus

When you first start up the Yocto, the clap decay time will be very short. After the clap is triggered a couple times, the decay should get longer. If you stop the sequencer for too long, the decay time will get short again and the circuit will need to be triggered a few times before the decay time ...

helectromagneticus

Pattern edit entering notes misbehaviour? It is be possible for everyone because i am waiting to always keep demanding programming assignment help . Some good notes are be showing how can we edit and how can we enter in the given notes which have good command on pattern. This problem was fixed by a...

helectromagneticus

This sounds like a bad connection to me. It's not fun, but I think you'll have to go over the circuit very carefully checking for cold solder joints, cracks, etc. Good luck! I hope you fix it! This type of problem is frustrating I know, but nearly impossible to debug over the internet...

helectromagneticus

I'm glad Masuto is up and running! Hey, Hope everyone is fine.. Hows your knowledge of the Cpu trig mechanics? After doing huge refactors I got kinda stuck with the firmware and it's been in this broken state for a few months now :( https://github.com/rv0/Yocto_808/tree/trigpulse_rewrite is where I...

helectromagneticus

In that case, it doesn't sound like you have a software problem. Check the connections on your encoder. You can try to reflow the solder joints to see if that helps.

helectromagneticus

I'm glad Masuto is up and running!

helectromagneticus

Hi, thanks for the reply. Yeah, I see that's an option to turn it too that dial but what do I do after this? Surely theres some sort of sequence of buttons I need too press etc? I had it on Midi before but nothing started. I bought the unit 2nd hand but was told it was updated too the latest softwa...

helectromagneticus

Hi all My Yocto v1 push encoder suddenly stop working, the tempo still works but not when I push it I’ve rarely used my yocto since I’ve built it and this function always used to worked properly but maybe after updating firmware that the problem arise ? Anyone here have this issue? Just dont feel l...

Search found 87 matches

Re: Clap longer decay?

Re: Unoffical Firmware Available

Re: Clap longer decay?

Re: Pattern edit entering notes misbehaviour?

Re: Open High Hat- intermittent fault, no decay and short cr

Re: Unoffical Firmware Available

Re: Push encoder suddenly stop working after firmware update

Re: Unoffical Firmware Available

Re: Someone please help with Midi slave setup :)

Re: Push encoder suddenly stop working after firmware update