Let's continue with the Hitom section. First add resistors. Do not pay attention of resistors type on the picture you certainly have different resistors.
Add film capacitors. On v1.02 mainboard C166 has been removed
Add electrolytic capacitors. Electrolytic capacitors are polarized, the long leg of the capacitors is the positive. Pay attention to orientation in which you solder electrolytic capacitors. The black part on the silkscreened electrolytic capacitor symbol is negative.
è
Add diodes. Diodes are polarized, the black ring must match the symbol silkscreened on the PCB. D72 is a 1N4746 this is the only one, take care !
Now, add transistors. Pay attention! There are two different type of transistor: 2SA1115 and 2SC2603. Do not mix !
Now, check hitom section power voltages and add ICs. Do not overheat ICs pins during solder process!
Finally, add potentiometers. Pay attention to potentiometers value they are all different. Then hitom section is finished, let's go to the rimshot section.
Follow us