Categories

Newsletter

PayPal

Finished:

 DescriptionQty
Acrylique case (not included)1
13M Overlay Yocto1
Long M3 screw16
 M3 nuts16
Short M3 screw11
Short M3 screw11
Entroise M3 10mm11
White line knob10
Orange line knob14
Rotary switch knob2
Nuts for Jack14


 


Make it:


Stick the overlay on the front panel.

REMEMBER TO REMOVE THE PROTECTIVE FILM ON ACRYLIC.

The OVERLAY GLUE VERY STRONG  YOU HAVE TO GLUE IT ON THE RIGHT PLACE THE FIRST TIME. ALIGN WITH THETOP  EDGE AND STICK IT SLOWLY.

Assemble the  Acrylic box with long black screws and nuts. Do not install the base before the circuit inside;)

Install the 11 spacers  with short chrome screws .

Circuits are now ready to be put in the box.

Attach the circuit with short black screws.

Embed IO_Board in the rear face.

Add buttons.


Now screw the 14 nuts  of the jack and you're done. It'll just initialize eeprom and have fun.

To initialize EEPROM set the switch to "Init EEPROM" and press the "Play" and "Shift" button. The LEDs will scroll the time of initialization.

Are you ready to have fun! ;)